Table of Contents
Advertisement
Turning On or Off Remote Sensor [REMOTE SENSOR]
This option determines which remote sensor on the projector is enabled in wireless mode.
The options are: [FRONT/BACK], [FRONT], [BACK], and [HDBaseT].
NOTE:
• The remote control of the projector will not be able to receive signals if the power supply of the HDBaseT transmission device
connected to the projector is switched on when this has been set to [HDBaseT].
TIP:
• If the remote control system does not function when direct sunlight or strong illumination strikes the remote control sensor of the
projector, change to other option.
[USER KEY]
Selects the functions to assign to the USER1/2/3 buttons on the remote.
Select "---" to disable a function.
Available functions
CONTRAST, BRIGHTNESS, SHARPNESS, COLOR, HUE, FREEZE, BLANK, MUTE, AV MUTE, AUTO ADJUST,
PIP/PBP, REF. LENS MEMORY1, REF. LENS MEMORY2, LENS CALIBRATION
TIP:
• The default setting for the USER1 button is [AUTO ADJUST].
• The [USER KEY] function is set on the projector side. When operating multiple projectors with one remote, every projector must
have the same assigned [USER KEY] functions.
128
5. Using On-Screen Menu
Advertisement
Table of Contents
Troubleshooting
