Connecting To A Hdbaset Transmission Device (Sold Commercially) - NEC PA1705UL-W Installation Manual

7-3. Connecting to a HDBaseT transmission device (sold commercially)

Use a LAN cable sold commercially to connect the HDBaseT IN port of the projector to a HDBaseT
transmission device sold commercially.
The HDBaseT IN port of the projector supports HDMI signals (HDCP) from transmission devices,
control signals from external devices (serial, LAN) and remote control signals (IR commands).
• Refer to the owner's manual accompanied with your HDBaseT transmission for connecting with
your external devices.
Connection example
c
a: Computer (for control use) / b: Computer (for output use) / c: Remote control /
d: Example of a transmission device / e: HDMI output video device
NOTE:
• Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially).
• The maximum transmission distance over the LAN cable is 100 m.
• Please do not use other transmission equipment between the projector and transmission equipment. The picture quality may be
degraded as a result.
• This projector is not guaranteed to work with all HDBaseT transmission devices sold commercially.
a
DC IN
HDBaseT IN
7. Connecting to Other Equipment
HDBaseT
d
156
b
e