Table of Contents
Advertisement
Installation
Securing the lens unit with the fall prevention wire
• If the projector is going to be suspended from a ceiling or another high place,
secure the lens unit using the fall prevention wire (sold separately). If the lens
unit is not secured, it may fall down if it comes lose.
REQUIRED
On use
Do not use on networks subject to overvoltage.
• Connect the projector's HDBaseT port and LAN port to a network for which
there is no risk of overvoltage being applied.
Overvoltage applied to the HDBaseT or LAN port could result in electric shock.
PROHIBITED
Lens shift, focus and zoom operations
• When shifting the lens or adjusting the focus or zoom, do so from either
behind or the side of the projector. If adjustments are performed from the
front, your eyes could be exposed to strong light and get injured.
REQUIRED
• Keep your hands away from the lens area when performing the lens shift op-
eration. If not, your fingers could get caught in the gap between the cabinet
and the lens.
CAUTION
xiii
Important Information
Advertisement
Table of Contents
Troubleshooting
