Table of Contents
Advertisement
[CONTROL]
TOOLS
ADMINISTRATOR MODE
This allows you to select [MENU MODE], save settings, and set a password for the administrator mode.
MENU MODE
NOT SAVE SETTING VALUES
NEW PASSWORD, CONFIRM
PASSWORD
PROGRAM TIMER
This option turns on/standby the projector and changes video signals, and selects [LIGHT MODE]
automatically at a specified time.
Important:
• Before using [PROGRAM TIMER], make sure that the [DATE AND TIME SETTINGS] feature is set. (→ page 137)
Make sure that the projector is in the standby condition with the POWER cord connected.
The projector has a built-in clock. The clock will keep working for about a month after the main power is turned off. If the main
power is not supplied to the projector for a month or more, it requires to set [DATE AND TIME SETTINGS] feature again.
Setting a new program timer
1. On the [PROGRAM TIMER] screen, use the ▲ or ▼ button to select [SETTINGS] and press
the ENTER button.
The [PROGRAM LIST] screen will be displayed.
Select either [BASIC] or [ADVANCED] menu.
(→ page 83)
Placing a check mark will not save your projector settings.
Clear this check box to save your projector settings.
Assign a password for the administrator mode.
121
5. Using On-Screen Menu
—
—
Up to 10 alphanumeric
characters
Advertisement
Table of Contents
Troubleshooting
