NEC PA1705UL-W Installation Manual page 37

• Simultaneous display of 2 images (PIP/PICTURE BY PICTURE)
Two images can be projected simultaneously with a single projector.
There are two types of layouts for the two images: [PIP] in which a sub-picture is displayed on
the main picture, and [PICTURE BY PICTURE] in which the main and sub pictures are displayed
next to each other.
• Seamless switch function for smoother screen changes when switching the signal
When the input connector is switched, the image displayed before switching is held so that that
the new image can be switched to without a break due to absence of a signal.
• Supports wired LAN
Equips the LAN and HDBaseT ports. Utilizing a wired LAN connected with these ports, it enables
to control the projector by a computer.
• Convenient software applications
Compatible with our software applications (NaViSet Administrator 2, ProAssist, Virtual Remote
Tool, etc.). The projector can be controlled from a computer connected via a wired LAN.
• NaViSet Administrator 2
You can monitor the status of the projector and control a variety of functions.
• ProAssist
Necessary adjustments can be made smoothly for multi-screen projection.
• Virtual Remote Tool
A virtual remote control is displayed on the computer screen to perform simple controls
such as turning the projector on/off, switching signals, etc. It is also possible to change the
background logo of the projector. (→ page 190)
Please visit our web site for downloading each software.
URL: https://www.sharp-nec-displays.com/dl/en/index.html
• CRESTRON ROOMVIEW and Extron XTP compatibility
The projector supports CRESTRON ROOMVIEW and Extron XTP, allowing multiple devices con-
nected in the network to be managed and controlled from a computer. Moreover, it enables to
output and control image via an Extron XTP transmitter connected with the projector.
• Energy-saving design with a standby power consumption of 0.15 W (100-130 V AC) / 0.20
W (200-240 V AC)
Selecting [ON] for [POWER-SAVING] from the menu can put the projector in power-saving mode.
When network is enabled: 0.4 W (100-130 V AC)/0.5 W (200-240 V AC)
When the network is disabled: 0.15 W (100-130 V AC)/0.20 W (200-240 V AC)
1. Check the product overview, supplied items and part names
2