Pioneer QUANTUM INVERTER Series Service & Troubleshooting Manual page 104

3.3.2. Fan Motor Removal
Note: Remove the panel plate and the connection of fan motor on PCB (refer to 3.1 Panel Plate
Disassembly and 3.2 Electrical Components Disassembly) prior to disassembling fan motor.
Procedure
3) Remove the fastening screws of the fan
motor (4 screws) (see Fig. 1).
4) Remove the fan motor.
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Outdoor Unit Disassembly

Figure 1
21
