Pioneer QUANTUM INVERTER Series Service & Troubleshooting Manual page 64

2.4. Fan Motor and Fan Disassembly
Note: Remove the front panel, electrical parts and evaporator (refer to 2.1. Front Panel Disassembly,
2.2. Electrical Parts Disassembly, and 2.3. Evaporator Disassembly) prior to disassembling fan motor
and fan.
Procedure
1) Remove the two screws and remove the
cover of the fan motor (see Fig. 28).
2) Remove the bearing sleeve (see Fig. 29).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Indoor Unit Disassembly

Screws
Figure 28
Figure 29
15
