Pioneer QUANTUM INVERTER Series Service & Troubleshooting Manual page 62

2.3. Evaporator Disassembly
Note: Remove the front panel and electrical parts (refer to 2.1. Front Panel Disassembly and 2.2. Electrical
Parts Disassembly) before disassembling the evaporator.
Procedure
1) Disassemble the pipe holder located at
the rear of the unit (see Fig. 23).
2) Remove the 1 screw on the evaporator
located at the fixed plate (see Fig. 24).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Indoor Unit Disassembly

Figure 23
Figure 24
13
