Outdoor Unit Disassembly; Panel Plate Disassembly - Pioneer QUANTUM INVERTER Series Service & Troubleshooting Manual

3. Outdoor Unit Disassembly

3.1.

Panel Plate Disassembly

3.1.1. Panel Plate Disassembly (PT-1, PT-2)
YN009GMFI22RPE / YN009GMFI20RPD / YN012GMFI22RPE / YN012GMFI20RPD / YN018GMFI20RPD
Procedure
1) Turn off the air conditioner and the
power breaker.
2) Remove the screw of the big handle
and then remove the big handle
(1-3 screws) (see Fig. 1).
3) Remove the screws of the top cover
and then remove the top cover (4
screws). One of the screws is located
underneath the big handle (see Fig. 2).
Note: This section is for reference only. Actual unit appearance may vary.
YN009AMFI22RPE / YN009AMFI20RPD / YN012AMFI22RPE / YN012AMFI20RPD
Illustration
Outdoor Unit Disassembly

(Some Models) 3 Screws
Figure 1
Top Cover
Figure 2
7

Scope of Models Covered:
Big Handle