Pioneer QUANTUM INVERTER Series Service & Troubleshooting Manual page 80

3.4. Fan Motor and Fan Disassembly
Note: Remove the front panel, electrical parts and evaporator (refer to 3.1. Front Panel Disassembly,
3.2. Electrical Parts Disassembly, and 3.3. Evaporator Disassembly) prior to disassembling fan motor
and fan.
Procedure
1) Remove the bearing sleeve (see Fig. 25).
2) Remove the fastening screw (see Fig. 26).
3) Pull out the fan motor and fan assembly
from the side.
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Indoor Unit Disassembly

Figure 25
Figure 26
31
