Table of Contents
Advertisement
Safety Instructions
Warning
• Do not use the power cord that is damaged. Fire or electric shock may result.
Take the following precautions when handling.
• Do not modify the power cord.
• Do not place heavy objects on top of the power cord.
• Do not bend, twist or pull the power cord excessively.
• Keep the power cord away from hot electrical appliances.
• Do not tie the power cord to other cables.
If the power cord becomes damaged (the core wire is exposed, the wire is broken
wire, and so on), contact your dealer.
• Before moving the base unit, turn off the base unit and unplug the AC adapter
and all of the wires.
• Do not use the base unit where it may be exposed to rain, water, or excessive
humidity.
Fire or electric shock may result.
• Do not place any containers of liquid or chemicals on top of the base unit.
Spilling liquid of any kind into the base unit may result in fire or electric shock.
• Do not leave the base unit or the remote control with its batteries inside in a
vehicle with the windows closed, in places where they will be exposed to direct
sunlight, or in other places that may become extremely hot such as the exhaust
vents of air conditioners or heaters.
Thermal deformation or technical malfunction may occur, which could result in
fire.
Caution
• Do not install in a location that exceeds the operating temperature range of the
base unit being used. Heat may build up inside and cause a fire.
• Do not place the base unit in the following locations.
• Badly ventilated or narrow places, such as inside a closet or in a book case.
• On soft surfaces such as a rug, bedding, blanket, and so on.
• Do not cover the base unit with a blanket, curtain, or tablecloth.
• Badly ventilated locations such as inside an AV rack or cabinet.
• Locations subject to high temperatures, such as near heating equipment.
• Do not install the base unit on an unstable surface such as a table that shakes or is
tilted.
The base unit may fall down or tip over causing damage, deformation, or injury.
• Cables should be wired so that they cannot trip people up and so on.
This could cause people to fall and be injured.
11
Advertisement
Table of Contents
