Table of Contents
Advertisement
Base Unit Identification System for Multiple Device Control
When lining up multiple external display devices to display images, you can
select the type of split screen and input source for each base unit.
You can set a unique base unit ID for each base unit to operate them
individually using a remote control, and then select type of split screen and
input source for each base unit.
Related Links
g
• "Setting the Base Unit ID"
p.64
• "Selecting the Base Unit You want to Operate"
Setting the Base Unit ID
To control multiple base units from a remote control, give each base unit a
unique ID.
a
Press the [Menu] button, select the Installation menu, and press the Enter
button.
p.64
b
Select Base Unit ID and press the Enter button.
c
Use the arrow buttons to select the identification number you want to use
for the base unit, and then press the Enter button.
d
Press [Menu] or [Esc] to exit the menus.
e
Repeat these steps for all of the other base units that you want to operate
from one remote control.
Selecting the Base Unit You want to Operate
After setting the base unit's ID, select the ID for the base unit you want to
operate using the remote control.
64
Advertisement
Table of Contents
