Table of Contents
Advertisement
Sharing Screens Using Epson iProjection (Wired Connection)
e
Select the Wired LAN menu and press the Enter button.
f
Assign the IP settings for your network as necessary.
• If your network assigns addresses automatically, select IP Settings to set
the DHCP setting to On.
• If you must set addresses manually, select IP Settings to set the DHCP
setting to Off, and then enter the base unit's IP Address, Subnet Mask,
and Gateway Address as necessary.
g
To prevent the IP address from being displayed on the network
information screen, set the IP Address Display setting to Off.
h
Select the Network Projection menu and press the Enter button.
i
Turn on the Base Unit Keyword setting if you want to prevent access to
the base unit by anyone not in the room.
When you turn on this setting, you must enter a displayed,
randomized keyword from a computer using Epson iProjection to
access the base unit and share the current screen.
j
Set the Epson iProjection setting to On.
k
Select the options as necessary.
• Moderator Password lets you enter a four-digit number password for
accessing the base unit as a moderator using Epson iProjection. (No
password is set by default.)
• Keyword Interrupt Display lets you select whether to display a base
unit keyword on the displayed image when accessing the base unit
using Epson iProjection.
l
When you finish selecting settings, go back to the Network Settings
screen, select Set, and follow the on-screen instructions to save your
settings and exit the menus.
• If no Web Control Password has been set, a screen prompting you to
set a password is displayed before you can save the settings. Follow the
on-screen instructions to set the password.
• You can check the IP address in Wired LAN Info. in the base unit's
Network menu.
44
Advertisement
Table of Contents
