Input Signal Settings - Signal I/O Menu
Normally the projector automatically detects and optimizes the input signal
settings. If you need to customize the settings, you can use the Signal I/O menu.
The available settings depend on the currently selected input source.
Setting
Options
HDMI IN EQ Level HDMI1
HDMI2
HDMI Out
Off
Intensity
Low
Medium
High
Description
Adjusts the HDMI input signal level
depending on the devices connected to
the HDMI port. If there is a lot of
interference in the image, or if a problem
such as no image being displayed occurs,
change the setting.
Adjusts the signal intensity input from
the HDMI port. Change this setting when
you cannot display the image output from
the HDMI port correctly.
Setting
Options
Audio Output Port
HDMI Out
Audio Out
HDMI Link
On
Off
Power Off Link
On
Off
Reset Signal I/O
—
Settings
Description
Sets the audio output port when
displaying images.
Set to On to enable the HDMI Link
features.
If this is set to On, when the receiver is
turned off, the connected external display
device is also turned off.
Resets all adjustment values on the Signal
I/O menu to their default settings.
83