Base Unit Initial Settings And Reset Options - Initial/All Settings Menu - Epson ELPWP20 User Manual

Base Unit Initial Settings and Reset Options - Initial/All Settings Menu

Settings on the Initial/All Settings menu let you reset certain base unit settings
to their default values and place the base unit in firmware update mode so you
can update the firmware.
Setting Options
Reset All —
Firmware Update —
Export Batch —
Settings
Import Batch —
Settings
Description
Lets you select menus for resetting the
settings to default values.
Enters the firmware update mode and
ready to update firmware using the USB-
A or Service port.
Exports the base unit's menu settings to
a USB flash drive or a computer, allowing
you to copy them to other base units of
the same model.
Imports menu settings that have been
saved to a USB flash drive or a computer.
Reset All options
When you select Reset All, you see the following screen.
If you do not want to reset values in particular menus, deselect the check box
next to the menu name. When you are ready to reset setting values, select
Execute.
You cannot reset the following settings:
• Language
Attention
If you perform Reset All, all of the passwords that have been set for the Network
menu are also reset and you need to set them again. To prevent the passwords
from being reset by unauthorized users, set Network to On in the Menu Protection
menu.
For the Network menu, if you turn on the Menu Protection setting, the
settings do not return to their default values when using the Reset All
option.
Related Links
g
• "Updating the Firmware"
p.100
94