Table of Contents
Advertisement
Sharing Screens Using Epson iProjection (Wireless Connection)
• For infrastructure mode, set the Simple AP setting to Off and go to
next step.
f
Select the Wireless LAN menu and press the Enter button.
The base unit starts searching for access points.
You can also search for access points using the Search Access Point
setting manually.
g
Select the access point you want to connect to.
If you need to assign the SSID manually, select SSID to enter the
SSID.
h
Assign the IP settings for your network as necessary.
• If your network assigns addresses automatically, select IP Settings to set
the DHCP setting to On.
• If you must set addresses manually, select IP Settings to set the DHCP
setting to Off, and then enter the base unit's IP Address, Subnet Mask,
and Gateway Address as necessary.
i
To prevent the IP address from being displayed on the network
information screen, set the IP Address Display setting to Off.
j
Select the Network Projection menu and press the Enter button.
k
Turn on the Base Unit Keyword setting if you want to prevent access to
the base unit by anyone not in the room with it.
When you turn on this setting, you must enter a displayed,
randomized keyword from a computer using Epson iProjection to
access the base unit and share the current screen.
48
Advertisement
Table of Contents
