Table of Contents
Advertisement
Base Unit Network Settings - Network Menu
Setting
Options
IP Settings
DHCP
IP Address
Subnet Mask
Gateway Address
IP Address Display
On
Off
Network Menu - Base Unit Control Menu
Settings on the Base Unit Control menu let you select settings for controlling
the base unit over a network.
Setting
Options
Basic Control
On
Off
Remote Password
Up to 8
alphanumeric
characters
(do not use * :
spaces)
Description
Set DHCP to On if your network assigns
addresses automatically; set to Off to
manually enter the network's IP Address,
Subnet Mask, and Gateway Address
using 0 to 255 for each address field.
Do not use these addresses: 0.0.0.0,
127.x.x.x, 192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address,
255.255.255.255 or 0.0.0.0 through
254.255.255.255 for Subnet Mask, and
0.0.0.0, 127.x.x.x or 224.0.0.0 through
255.255.255.255 for Gateway Address.
Set to On to display the IP address on the
network information screen and Home
screen.
Description
Set to On to monitor and control the base
unit using Basic Control in Epson Web
Control.
Enter a password for accessing the base
unit using the Basic Control. (The user
name is EPSONREMOTE. No password
is set by default.)
Setting
Options
Secure HTTP
On
Off
Web Server
—
Certificate
Network Menu - Network Projection Settings
Settings on the Network Projection menu let you select settings related to
network display.
Setting
Options
Base Unit Keyword
On
Off
Epson iProjection
On
Off
SSID Display
On
Off
Moderator
Four-digit number
Password
Description
To strengthen security, communication
between the base unit and computer
in Web control is encrypted. When
setting security with Web control, it is
recommended to set this to On.
Imports the Web server certificate for
secure HTTP.
Description
Set to On to enable a security password to
prevent access to the base unit by anyone
not in the same room as the base unit.
You must enter a displayed, randomized
keyword from a computer using Epson
iProjection to access the base unit and
share the current screen.
Set to On to use Epson iProjection.
Set to On to display the SSID on the
network information screen and Home
screen.
Enter a password for accessing the
base unit as a moderator using Epson
iProjection. (No password is set by
default.)
92
Advertisement
Table of Contents
