Epson ELPWP20 User Manual page 54

Sharing Mobile Device Screen Using Screen Mirroring
a
Press the [Menu] button, select the Network menu and press the Enter
button.
b
Select Network Settings and press the Enter button.
c
Select Priority Control Interface and press the Enter button.
d
Choose one of the following options:
• If you cast the data via local area network using the wired LAN, select
Wired LAN.
• If you cast the data directly or via wireless access point, select Wireless
LAN.
• If your device only supports casting data directly, select Wireless LAN.
e
Set the Simple AP setting to On.
f
Go back to the Network Settings screen and select Network Projection.
g
Select the Screen Mirroring options as necessary.
• Interrupt Connection lets you select to connect to another mobile
device during Screen Mirroring display or to exclusively connect to one
device. If you want to use two Screen Mirroring sources, set this to Off.
• Adjust Image Quality lets you adjust the screen mirroring speed/
quality. Select a smaller number to improve the quality and select a
larger number to increase the speed.
• Screen Mirroring Info displays connection information when
displaying the Screen Mirroring source.
h
When you finish selecting settings, go back to the Network Settings
screen, select Set, and follow the on-screen instructions to save your
settings and exit the menus.
If no Web Control Password has been set, a screen prompting
you to set a password is displayed before you can save the settings.
Follow the on-screen instructions to set the password.
54