Sharing Screens Using Epson Iprojection (Wired Connection); Selecting Wired Network Settings - Epson ELPWP20 User Manual

Sharing Screens Using Epson iProjection (Wired Connection)

You can connect the receiver (base unit or supported projector) to your wired
network by using a LAN cable.
By connecting the receiver to a Windows/Mac computer or mobile device
through a network, you can share the screen of the computer or mobile device
with an external display device.
If you are using the Epson Wireless Presentation System (ELPWP10)
with a supported projector, see your projector User's Guide for details on
network settings for the projector.
After connecting and setting up the receiver as described here, download and
install Epson iProjection (Windows/Mac) from the following Web site.
epson.sn
Epson iProjection software sets up your computer for network display. It also
allows you to hold interactive meetings by displaying the computer screens of
users over a network. See the Epson iProjection Operation Guide (Windows/Mac)
for instructions.
• Make sure you have installed the latest version of Epson iProjection.
• If the Web Control Password has not been set, a screen prompting
you to set a password is displayed when you save the network settings.
Follow the on-screen instructions to set the password.
Related Links
g
• "Selecting Wired Network Settings"
• "Display Order of Screens from Multiple Devices"

Selecting Wired Network Settings

Before you can display images from computers on your network, you need to
select network settings on the base unit.
p.43
p.58
Make sure you already connected the base unit to your wired network
using the LAN port.
a
Press the [Menu] button, select the Network menu, and press the Enter
button.
b
Select Network Settings and press the Enter button.
c
To identify the base unit over the network, select Base Unit Name and
enter a name up to 16 alphanumeric characters long.
d
Set the Priority Control Interface setting to Wired LAN.
43