Table of Contents
Advertisement
Initializing a Logical Drive
Initialization is done to logical drives after they are created from a disk array.
Initialization sets all data bits in the logical drive to zero. The action is useful
because there may be residual data the logical drives left behind from earlier
configurations. For this reason, Initialization is recommended for all new logical
drives.
Initialize a Logical Drive:
1.
Click the Subsystem
2.
Click the Logical Drive Summary
3.
Click the
You can also start Initialization from the Subsystem
Activities tab
4.
Click the Background Activities tab in Management View.
5.
From the Background Activities dropdown menu, choose Initialization.
6.
To choose Quick Initialization, check the box.
If you checked the box, enter a value in the Quick Initialization Size field.
This value is the size of the initialization blocks in MB.
7.
If you did not choose Quick Initialization, enter a hexidecimal value in the
Initialization Pattern in Hex field or use the default 00000000 value.
8.
Click the Submit button.
9.
In the confirmation box, type the word confirm in the field provided.
10. Click the OK button.
To view the progress of the Initialization, click the Background Activity tab.
To set Initialization priority, see ―Making Background Activity Settings‖ on
page 69.
Running Redundancy Check
Redundancy Check is a routine maintenance procedure for fault-tolerant logical
drives (those with redundancy) that ensures all the data matches exactly.
Redundancy Check can also correct inconsistencies. You can also schedule a
Redundancy Check. See ―Scheduling an Activity‖ on page 72.
Chapter 4: Management with ASUS Storage Management
When you initialize a logical drive, all the data the logical drive will
be lost. Backup any important data before you initialize a logical
drive.
icon in Tree View.
icon of the logical drive you want to Initialize.
Caution
icon.
16
6
icon Background
Advertisement
Table of Contents
