Table of Contents
Advertisement
•
PrimitiveSeqErrorCount – An ordered set transmitted repeatedly and used
to establish and maintain a link.
LR, LRR, NOS, and OLS are primitive sequences used to establish an active
link in a connection between two N_Ports or an N_Port and an F_Port.
LIP, LPB, and LPE are primitive sequences used in the Arbitrated Loop
topology for initializing the loop and enabling or disabling an L_Port.
•
InvalidWordSentCount – Number of invalid words sent since last reset.
•
InvalidCRCCount – Invalid Cyclical Redundancy Count. Number of frames
received with an invalid CRC since last reset.
•
InitiatorIOCount – I/O Count on the initiator on the host side.
Clearing Statistics
To clear statistics, see ―Clearing Statistics‖ on page 275.
Viewing Fibre Channel Initiators
LUN Mapping must be enabled in order for ASUS Storage to recognize a Fibre
Channel. See ―Enabling LUN Mapping‖ on page 261.
To view Fibre Channel initiators:
1.
From the Main Menu, highlight Fibre Channel Management and press Enter.
2.
Highlight Fibre Channel Initiators and press Enter.
A list of all currently logged-in initiators appears on the screen.
Adding a Fibre Channel Initiator
LUN Mapping must be enabled in order for ASUS Storage to add a Fibre
Channel. See ―Enabling LUN Mapping‖ on page 261.
You must add an initiator to the ASUS Storage's initiator list in order to use the
initiator to create a LUN for your logical drive.
To add an initiator:
1.
From the Main Menu, highlight Fibre Channel Management and press Enter.
2.
Highlight Fibre Channel Initiators and press Enter.
3.
Highlight the initiator you want to add and press the spacebar to choose it.
4.
Highlight Add Marked Initiators and press Enter.
The initiator is added to ASUS Storage's initiator list.
Chapter 6: Management with the CLU
249
Advertisement
Table of Contents
