Network Connections - Asus DS300i User Manual

User manual
Hide thumbs Also See for DS300i:
Table of Contents

Advertisement

Chapter 10: Troubleshooting

Network Connections

Each controller has one Ethernet RJ45 connector on the back of the enclosure
for the Management port and four RJ45 connectors for the iSCSI ports. The
ASUS Storage becomes a node on your network like any other PC or server.
ASUS Storage supports DHCP. If there is a DHCP server on your network, do not
assign an IP address manually without consulting your network administrator.
Management Port
ASUS Storage ships from the factory a default Management Port IP address of
10.0.0.1. You must change this address to one that will work with your network.
See ―Chapter 3: ASUS Storage Setup‖ on page 39.
Figure 18. Management port connection
Activity LED
Connectivity LED
State
LEDs
Dark
Green
Flashing Green
Activity
No activity
Activity
Connectivity
10BaseT
100BaseT
iSCSI Ports
ASUS Storage ships from the factory default iSCSI Port IP addresses of 10.0.0.2
through 10.0.0.5. You must change these addresses to work with your GeE
network. See ―Chapter 3: ASUS Storage Setup‖ on page 39 or ―Making iSCSI
Port Settings‖ on page 81 (ASUS Storage Management) or page 244 (CLU).
394

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds300f

Table of Contents