Making Data and Management Connections
You can configure your ASUS Storage for:
•
Fibre Channel Direct Attached Storage (DAS), see below
•
Fibre Channel Storage Area Network (SAN) (page 21)
•
iSCSI Direct Attached Storage (DAS) (page 24)
•
iSCSI Storage Area Network (SAN) (page 27)
•
SAS JBOD Expansion (page 30)
•
SAS JBOD Expansion (page 30)
Fibre Channel Direct Attached Storage (DAS)
This arrangement requires:
•
A Fibre Channel (FC) interface card in the Host PC
•
At least one FC transceiver for each ASUS Storage subsystem
•
A network interface card (NIC) in the Host PC
•
A standard network switch
Data Path
The ASUS Storage DS300f controller has two (2) FC Port connectors and one
(1) SFF-8088 SAS Expansion Port connector. See page 19, Figure 7.
To establish the data path:
1.
Install an FC transceiver into the FC data port on the ASUS Storage
controller.
See page 20, Figure 8.
For a list of supported FC HBAs, Switches and SFPs, download
the latest compatibility list from the ASUS support web site
http://support.asus.com/.
ASUS Storage does not support cascading of multiple RAID
subsystems. Cascading is planned for a future release.
ASUS Storage Fibre Channel subsystems also have two (2)
Ethernet RJ45 iSCSI Port connectors. See ―iSCSI Direct Attached
Storage (DAS)‖ on page 24 for connection instructions.
Chapter 2: ASUS Storage Installation
Important
Note
1
8