Table of Contents
Advertisement
To restart the ASUS Storage subsystem on a Telnet connection:
1.
From the Main Menu, highlight Additional Info and Management, and press
Enter.
2.
Highlight Shutdown or Restart and press Enter.
3.
Press the spacebar to display Restart then press Enter.
A warning message appears.
4.
Press Y to continue.
The screen will go blank.
5.
Wait for two to three minutes.
6.
Re-establish your Telnet connection to the ASUS Storage CLU.
If you cannot re-establish a connection, wait 30 seconds, then try again.
Restarting Subsystem over a Serial Connection
To restart the ASUS Storage subsystem on a serial connection:
1.
From the Main Menu, highlight Additional Info and Management, and press
Enter.
2.
Highlight Shutdown or Restart and press Enter.
3.
Press the spacebar to display Restart then press Enter.
A warning message appears.
4.
Press Y to continue.
The screen will display shutdown and startup functions.
5.
When the
Do not restart the ASUS Storage subsystem during a firmware
upgrade procedure. Wait until the upgrade is one and you are
prompted to restart.
Login:
prompt appears, log into the CLU again.
Warning
310
Chapter 8: Maintenance
Advertisement
Table of Contents
