Removing The Front Cover 1 - Brother LX-300 Service Manual

3.3.6 Removing the Front Cover
1. Remove the two Front cover screws under the Bottom cover B.
∗
When removing the Body cover, remove the two Front cover screws and the two
screws at the rear of the Bottom cover B at the same time.
∗
When inverting the unit to perform this work, place it on a soft cloth to avoid
scratching the cover.
2. Pull the front cover forward to remove it.
(The Body cover must be removed before removing the Front cover.)
Front cover screws
Fig. 3.3-10

Removing the Front Cover 1

Fig. 3.3-11 Removing the Front Cover 2
Front cover
3-7
Soft cloth