Roller Holder Assy; Installing The Roller Holder Assy - Brother LX-300 Service Manual

4.10 Roller Holder Assy

4.10.1 Installing the Roller Holder Assy

1. Install the pivots for Roller holder rotation onto the Main chassis shafts.
2. Mount the plastic spacers to the lugs (rivet pins) at each end of the Roller holder
assy.
3. Pass the lugs (rivet pins) on the roller holder unit through the curved slots on the
Main chassis L and R and the slots on top of the Paper feed roller plate.
4. Fasten the Roller holder in position with the four Retaining rings.
5. Install the Roller holder return spring while the Roller holder unit is open.
Retaining rings
Spacer
Main chassis shafts
Fig. 4.10-1 Installing the Roller Holder Assy
Roller
holder
return spring
Retaining ring
4-19
Roller holder assy
Spacer
Retaining ring