Removing The Chassis Assy - Brother LX-300 Service Manual

3.4.3

Removing the Chassis Assy

1. Remove the Ground wire screw from the Main chassis B, then disconnect the
ground wire.
2. Remove the two Bottom cover screws B and the washers from under the Bottom
cover B.
∗
When inverting the unit to perform this work, place it on a soft cloth to avoid
scratching the cover.
Bottom cover screws B
Main chassis B
Ground wire
Fig. 3.4-4 Removing the Chassis Assy 1
Fig. 3.4-5 Removing the Chassis Assy 2
Ground wire screw
Bottom cover B
3-14
Washers