Y-Ca Chassis; Removing The Y-Ca Chassis Assy - Brother LX-200 Service Manual

3.7 Y-CA Chassis

3.7.1

Removing the Y-CA Chassis Assy

1. Remove the Y-extension spring L.
2. Remove the two Y-CA chassis screws
3. Remove the Y-CA timing belt from the Y-cutter arm and remove the Y-CA chassis
assy.
Y-extension spring L
Y-cutter arm
Y-CA chassis screws
Fig. 3.7-1 Removing the Y-CA Chassis Assy
3-19
Y-CA timing belt
Y-CA chassis assy