Removing The Paper Feed Roller Assy - Brother LX-200 Service Manual

3.9.2

Removing the Paper Feed Roller Assy

1. Position the chassis unit as shown in the diagram. Release the gear 16 hook from
the paper feed sub-roller assy. Take care not to damage the gear hook by opening
too far.
2. Remove the paper feed roller ring from the chassis right side.
Chassis right side
3. Remove the left and right bearing.
4. Remove the paper feed roller assy from the left and right sides of the chassis.
Paper feed roller ring
Paper feed roller assy
Fig. 3.9-3 Removing the Paper Feed Roller Assy (1)
Bearings
Paper feed roller assy
Fig. 3.9-4 Removing the Paper Feed Roller Assy (2)
3-27
Chassis left side
Gear 16 hook