Driving Roller Shaft; Installing The Driving Roller Shaft - Brother LX-200 Service Manual

4.6 Driving Roller Shaft

4.6.1 Installing the Driving Roller Shaft

1. Insert the semicircular end of the driving roller shaft into the hole in chassis L.
2. Put the driving roller bearing from the left and attach it to chassis L. (Align the lug on
the bearing with the cut-out in the chassis.)
3. Insert the right end of the driving roller shaft into the hole in chassis R.
4. Put the driving roller bearing from the right and attach it to chassis R. (Align the lug
on the bearing with the cut-out in the chassis.)
5. Fasten the right end of the driving roller shaft with the driving roller E ring.
6. Put the gear 16M1 hook on the left end of the driving roller shaft and fasten it with
the driving roller C ring. Take care not to open the driving roller C ring too far.
Driving roller C ring
Gear 16M1 hook
Driving roller
bearing
Driving roller shaft
Fig. 4.6-1 Installing the Driving Roller Shaft
4-9
Driving roller E ring
Driving roller bearing