Installing The Y-Cutter Arm L - Brother LX-200 Service Manual

4.11.3 Installing the Y-cutter Arm L

1. Engage the lug on Y-cutter guide L with the groove in Y-cutter arm L. Insert the Y-
cutter arm shaft in Y-cutter arm L.
2. Insert the Y-cutter arm shaft in holes in the chassis L/R. Fasten with the two arm
shaft rings.
Groove
Lug
Y-cutter arm L
Y-cutter arm shaft
Arm shaft rings
Fig. 4.11-3 Installing the Y-cutter Arm L
4-21