Brother LX-200 Service Manual page 101

3.Insert the lug on the Y-cutter guide R into the slot in the dial switch holder assy.
4.Engage the two hooks on the body cover front face.
5.Push down the body cover sides to engage the two hooks.
6.Push down the body cover rear face to engage the four hooks.
Hook
Body cover
Side hook
Dial switch holder assy
Slot
Lug
Fig. 4.17-11 Installing the Body Cover (3)
Side hook
Rear hooks
Front hooks
Fig. 4.17-12 Installing the Body Cover (4)
4-39
Y-cutter guide R
Bottom cover