3.7.3
Removing the Roller Holder Assy
1. Move the Y-cutter arm L as far as possible to the left.
2. Lift up the roller holder assy and remove the roller holder spring.
3. Remove the two roller holder rings. Push the roller holder assy to the right to
disengage it from the chassis unit L boss shaft. Disengage the roller holder assy
from the chassis unit R boss shaft.
Y-cutter arm L
Chassis unit L boss shaft
Roller holder rings
Roller holder assy
Fig. 3.7-3
Removing the Roller Holder Assy
3-21
Chassis unit R boss
shaft
Roller holder ring