Installing The Y-Ca Chassis Assy - Brother LX-200 Service Manual

4.13.2 Installing the Y-CA Chassis Assy

1.Align the Y-CA chassis assy with the positioning hook and the two bosses on chassis
L.
Positioning
hook
2.Attach the Y-CA timing belt to the attachment position on the Y-cutter arm L.
3.Fasten the Y-CA unit with the two Y-CA frame screws.
4.Attach the Y-extension spring L.
Y-CA
timing belt
Y-extension
spring L
Bosses
Fig. 4.13-2 Installing the Y-CA Chassis Assy (1)
Y-cutter arm L
Y-CA frame screws
Fig. 4.13-3 Installing the Y-CA Chassis Assy (2)
4-26
Y-CA timing belt
Y-CA chassis assy