Removing The Switch Pcb Assy - Brother LX-200 Service Manual

3.5.3

Removing the Switch PCB Assy

1.Remove the two switch PCB screws A and three switch PCB screws B from
under the body cover B. Remove the switch PCB assy 1.
SW PCB assy 1
2.Remove the start switch B,start key film, start key actuator, two-connection
switch, and power switch.
Start key actuator
Start key film
Start switch B
Switch PCB screws A
Fig. 3.5-3 Removing the Switch PCB Assy (1)
Two-connection switch
Fig. 3.5-4 Removing the Switch PCB Assy (2)
3-16
Switch PCB screws B
Power switch