Installing The Cassette Detect Switch; Installing The Encoder (Enc) Sensor Pcb - Brother LX-200 Service Manual

Name of Screw Qty.
Leaf switch R/L screw
Dial holder screw
Cover switch screw
Front cover screw
Bottom cover screw A
Trimmer cover screw
4.3 Lower Chassis

4.3.1 Installing the Cassette Detect Switch

Align the leaf switch C assy with the boss hole in the lower chassis and fasten it in
position with the leaf switch (SW) C screw. Take care not to deform the tip of the leaf
switch C assy during installation.
Lower chassis

4.3.2 Installing the Encoder (ENC) Sensor PCB

Align the ENC sensor assy with the two bosses. Fasten the assembly to the cassette
holder with the ENC sensor screw.
Screw Size
2 PAN-HEAD MACHINE SCREW M2.6
2
TAPTITE,BIND B M3 8
1 PHILLIPS PAN-HEAD TAPTILE B M2.6
12
2 TAPTITE,BIND B M2.6X6
2 TAPTITE,BIND B M3X12
2 SCREW,BIND M3 6
Boss hole
Leaf switch C assy
Fig. 4.3-1 Installing the Cassette Detect Switch
Fig. 4.3-2 Installing the ENC Sensor PCB
Tightening Torque
8 0.196 to 0.392N•m
0.49 to 0.686N•m
0.49 to 0.686N•m
0.294 to 0.49N•m
0.196 to 0.392N•m
0.49 to 0.686N•m
Leaf switch (SW) C screw
Bosses
ENC sensor screw
ENC sensor assy
4-2
See
Page
4-35
4-35
4-36
4-37
4-40
4-43