Installing The Trimmer Upper Cover - Brother LX-200 Service Manual

4.17.9 Installing the Trimmer Upper Cover

1.Set the unit on its side with the trimmer upper cover uppermost.
2.Engage part B of the trimmer upper cover with part A on the chassis. Align the
trimmer cover with the two bosses and fasten it in position with the two trimmer
cover screws.
Chassis
part A
3.Insert the T-cutter plate into the trimmer cover.
4.Insert the trimmer bottom cover.
Part B
Trimmer cover
Boss
Fig. 4.17-18 Installing the Trimmer Cover 1
T-cutter plate
Fig. 4.17-19 Installing the Trimmer Cover 2
4-43
Bosses
Trimmer cover screws
Trimmer bottom cover