2.Align slide plate 2 with the boss on slide plate 1B and fasten it with the slide plate
screw.
Slide plate screw
Fig. 4.17-2
3.Engage the slide plate 1B hook and bosses A with the slots in the dial S holder assy.
Ensure that slide plate 1B is positioned relative to the dial lock arm as shown in
detail A.
4.Align the plate spring with bosses B and fasten it in position with the slide plate spring
screw.
Plate spring
Detail A
Fig. 4.17-3
Bosses
Reassembling the Dial Switch Holder Assy B (2)
Slide plate spring screw
Bosses B
Reassembling the Dial Switch Holder Assy B (3)
4-34
Slide plate 2
Slide plate 1B
Bosses A
Slide plate 1B
Hook
Dial S holder assy