X-Cutter; Removing The X-Cutter Unit; Disassembling The Tape Sensor Unit - Brother LX-200 Service Manual

3.12 X-cutter

3.12.1

Removing the X-cutter Unit

1. Remove the two X-cutter screws. Lift up the X-cutter unit.
X-cutter screws
3.12.2

Disassembling the Tape Sensor Unit

1. Remove the leaf switch screw. Remove the leaf switch F assy.
2. Remove the sensor holder screw. Remove the tape sensor holder from the X-cutter
unit.
3. Remove the tape sensor lever from the tape sensor holder.
Tape sensor holder
X-cutter unit
Fig. 3.12-1 Removing the X-cutter Unit
X-cutter unit
Tape sensor lever
Fig. 3.12-2 Disassembling the Tape Sensor Unit
3-32
Leaf switch F assy
Leaf switch screw
Sensor holder screw