Y-Ca Chassis Assy And Y-Cutter Arm; Installing The Y-Cutter Arm - Brother LX-300 Service Manual

4.12 Y-CA Chassis Assy and Y-Cutter Arm

4.12.1 Installing the Y-cutter Arm

1. Mount the Y-sensor carriage arm to the Y-cutter arm with the Y-CA arm screw.
Y-cutter arm
2. Pass the Y-cutter arm shaft through the Y-CA chassis assy and Y-cutter arm and
fasten with a Retaining ring at each end.
Y-CA chassis assy
Y-CA arm screw
Fig. 4.12-1 Installing the Y-cutter Arm 1
Y-cutter arm shaft
Retaining rings
Fig. 4.12-2 Installing the Y-cutter Arm 2
4-23
Y sensor carriage arm
Y-cutter arm