Brother LX-300 Service Manual page 73

7. Align the Leaf switch SG assy with the boss hole and fasten it with the Leaf switch
SG screw.
Before installing the Leaf switch SG assy, turn the Control cam gear to a position
where it cannot interfere with the Leaf switch.
8. Install the SG motor with the two SG motor A screws.
9. Install the Idle gears A.
10. Attach the Chassis R support with the Chassis R support screw.
Fig. 4.7-7
Leaf switch SG assy
Installing the Right Side of the Chassis 5
4-13
SG motor
SG motor screws A
Idle gears A
Chassis R support
Chassis R support screw
Leaf switch SG assy screw