Trimming Mechanism; Assembling The Trimming Assy - Brother LX-300 Service Manual

4.5 Trimming Mechanism

4.5.1

Assembling the Trimming Assy

1. Align the Leaf switch assy TRI with the T-cutter assy boss hole and attach it with the
Leaf switch TRI screw.
2. Fasten the harness to the hooks.
Engage the harness into the hook under the Cassette holder, then fix it with tape on
the two marked areas (Chassis B front face and Chassis R inside surface).
3. Align the T-cutter assy with the boss holes and install it with the T-cutter screw.
Leaf switch TRI harness
Leaf switch TRI assy
The bottom face of
cassette holder
Fig. 4.5-1 Assembling the Trimming Assy
4-7
Leaf switch TRI screw
T-cutter assy
T-cutter screw