Right Side Of The Main Chassis; Removing The Right Side Of The Chassis - Brother LX-300 Service Manual

3.12 Right Side of the Main Chassis

3.12.1 Removing the Right Side of the Chassis

1. Remove the two Idle gears A.
2. Remove the two SG motor screws and remove the SG motor.
3. Remove the Leaf switch SG screw, then remove the Leaf switch SG assy.
4. Remove the T-lever shaft.
5. Push down on the T-lever unit to align the slot hole with the shaft, then remove the
unit.
T-lever shaft
Leaf switch SG assy
Fig. 3.12-1 Removing the Right Side of the Chassis 1
T-lever A
T-lever unit
Fig. 3.12-2 Removing the T-lever Unit
3-27
SG motor
SG motor screws
Idle gears A
Chassis R support
Chassis R support screw
Leaf switch SG assy screw
T-lever spring
T-lever B
T cam roller
Slot