Brother GeoBook NB-80C Instructions Manual page 150

• To shade an object:
1. Select one or more graphic objects to shade.
2. Click on the Area Shading tool. A horizontalpop-up menu appears. The
option fim'tbest to the lej_ is 100% shading while the option farthest to the
night is 0%, the same as an unfilled object.
3. Select the shading you want. ,Drawing applies the area shading.
• To fill an object with a pattern:
1. Select one or more graphic objects to fill with a pattern,
2. Click on the Area Pattern tool. A hon'zomalpop-up menu appears.
3. Select the pattern you want. Drawing applies the area pattern.
• To change an object's tone or pattern using the Attributes
menu:
1. Select the
object(s).
Handles appear around the object(s).
2. Select Area Attributes from the Attributes menu. A diedog box appears.
3. Select the tone or pattern, from the palette in the dialog box.
4. Click on Apply.
5. Click on Close.
Use background tone • TO
use a background tone:
when youwant to use
tone under your pattern
or shaded tone. It will
show through. - _'_-
r--- 5.
1. Click on the objea. Handles appear around tbegrapbic.
2. Select Background Tone from the Attributes menu. A dialog box appears.
- 3. Select-the toneorthe background.
4. Click on Draw Background.
Click on Apply. The background cbamges tone and will show underneath
the area attn'bute shade or pattern.
Drawing 138