Pasting Inside - Brother GeoBook NB-80C Instructions Manual

Pasting Inside
When you paste an object inside another object, Drawing combines them into
a single object that you can manipulate as you would any other Drawing
object.
The boundaries of the outside object become the boundaries of the inside
object. Once you have pasted an object inside another, you can free tune the
position of the inside object by moving it one pixel at a time.
You can also break the object into its component objects using the Break Out
Paste Inside command.
The following example shows how to paste one object inside another.
To paste inside:
ff _e two objects do not
1. Place the inside object over the outside object. Position the inside object
ovedap, you cannot where you want it in the outside object, as shown in the following
paste inside, example:
Be sure to position the..
interior object as close as
possible to where you
want iL You can fine tune
it later, nudging it one
pixel at a time.
2. Select the inside object.
3. Press CUT. Drawing places the object on the clipboard.
4. Select the outside object.
5. Select Paste Inside from the Edit menu. A submenu appears.
6. Select Paste Inside. Drawing pastes the inside object in the outside object:
Drawing 149