Table 003-1 Recommended Fasteners - NEC NEAX 2000 IVS Installation Manual

NAP 200-003
Sheet 24/37
Installation of Main Equipment
2. Wall Mounting Installation
(1) Using four appropriate fasteners (locally provided; see
cure the RACK PARTS as shown in
NAP-200-002.
WALL TYPE
PLASTER BOARD
[THICKNESS Min. 9.6 mm
(0.38 inch)]
WOOD
CONCRETE
Note: For the wall-mounting installation, a concrete wall is recommended because the concrete wall is more firm
to mount the PBX than a wooden wall or a plaster board. The plaster board is the most infirm wall of the
three.
CHAPTER 3
Page 46
Revision 2.0
Figure 003-21. For the wall mounting points, refer to

Table 003-1 Recommended Fasteners

MOLLY ANCHOR TYPE
WOOD TYPE SCREWS
ANCHOR BOLT TYPE
ND-45492 (E)
Table 003-1) for the type of wall construction, se-
RECOMMENDED FASTENER
Min. 3.5 mm (0.14 inch) DIA.
Max. 4.5 mm (0.17 inch) DIA
Min. 3.5 mm (0.14 inch) DIA
Max. 4.5 mm (0.17 inch) DIA
Recommended 4 mm (0.16 inch) by
25 mm (0.98 inch)
Figure 002-2 in