NAP 200-006
Sheet 1/7
Cable Running to the MDF
1. MDF Cable
To facilitate the termination of the 25 pair cables (MDF cables) from the system to the MDF shown in
006-1, the length of each cable to be used should be predetermined according to the distance between the MDF
and the system. Each cable should be labeled at both ends using a cable number or cable designation as shown
in
Table
006-1.
CHAMP CONNECTOR
TO PIM
TO MDF
Figure 006-1 MDF Cable
ND-45492 (E)
TWISTED 25 PAIR CABLES
Figure
CHAPTER 3
Page 79
Revision 2.0