NAP 200-004
Sheet 1/12
Installation of Peripheral Equipment
1. Installation of External MDF
•
Secure the external MDF onto the floor or mount the MDF onto the wall.
•
Mount the required MDF components.
•
If required, install the cable ducts for the cables to be laid between the MDF and the Main Equipment. In
this case, confirm the locations of the cable holes for the Main Equipment. Refer to
RACK PARTS
214 mm (8.4 inch)
CHAPTER 3
Page 60
Revision 2.0
FRONT
430 mm (16.9 inch)
Figure 004-1 Location of the Cable Hole
ND-45492 (E)
Figure
004-1.
CABLE HOLE
30 mm (1.2 inch)
184 mm (7.2 inch)