Unpacking The Projector; Additional Components - Epson PowerLite 6110i User Manual

Unpacking the Projector

After unpacking the projector, make sure you have all the parts
shown below:
Projector
Power cable
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use a carrying case. See page 91 for transportation instructions.

Additional Components

Depending on how you plan to use the projector, you may need
additional components:
■ To receive an S-Video signal, you'll need an S-Video cable. One
may be provided with your video equipment, or you can purchase
one from Epson; see page 14.
To receive a component video signal from a VCR or other video
■
device, you'll need a component-to-VGA video cable. One may
be provided with your video equipment, or you can purchase one
from Epson; see page 14.
Remote control and
batteries
VGA computer cable
User's Guide and
Projector Software CDs
Cable cover
Welcome
13