Selecting Network Settings - Epson PowerLite 6110i User Manual

Monitoring the Projector Over a Network
76

Selecting Network Settings

Follow the instructions in this section to set up the projector's
network settings in the menu system.
1. Press the button.
Menu
2. Select the
Network
3. Press . Then use the
Enter
items and the
Enter
■ Wired LAN
If your network assigns addresses automatically, turn on the
setting.
DHCP
If your network does not assign addresses automatically, turn
off and enter the projector's
DHCP
, and
Mask Gateway Address
To enter numbers, use the numeric buttons on the remote
control.
■
PJLink Password
Lets you enter a password for using the PJLink
control the projector.
■
Web Control Password
Lets you enter a password for accessing the projector over the
web from a computer running the EMP Monitor software.
menu.
pointer button to highlight menu
button to set the following options:
IP Address
as needed.
,
Subnet
™
protocol to